Monitoring AKCP sensorProbe2 with Nagios XI Using SNMP

The sensorProbe2, sensorProbe4, sensorProbe8 and Probe8-X20 are intelligent devices for monitoring environmental variables, power, physical threads and security. Various AKCP intelligent sensors can be connected via the RJ45 connectors to the sensorProbe devices.

AKCP sensorProbe2 Web Interface

I would like to show you how easy it is to monitorĀ a Dual Temperature/Humidity AKCP Sensor in Nagios XI via SNMP active checks and SNMP traps.

Not everyone realizes how important a proper temperature control is. If there is an air conditioning malfunction or abnormal weather conditions, damage to information, delicate electronic equipment or warehouse stock may occur.

With Nagios XI, you can easily monitor a Dual Temperature/Humidity AKCP sensor via SNMP and SNMP Traps. All you need to do is to run the SNMP and the SNMP Trap Monitoring Wizards! It takes less than 15 minutes to get your host set up and running.

Nagios XI Service Status - AKCP sensorProbe2

To learn how you do this, please, review ourĀ “How to Monitor an AKCP sensorProbe2 using SNMP” document.

0 Responses to “Monitoring AKCP sensorProbe2 with Nagios XI Using SNMP”


Comments are currently closed.